TM 9-2320-366-34-3
(5) Remove two screws (1), washers (2), and chain from
turntable bearing (3).
b. Installation.
(1) Install chain on turntable bearing (1) with two washers
(2) and screws (3).
WARNING
Turntable bearing weighs approximately 150
lbs (68 kgs). Attach a suitable lifting device
prior to installation. Failure to comply may
result in injury to personnel or damage to
equipment.
NOTE
Steps (2) and (3) require the aid of an assistant.
(2) Lift turntable bearing (1) in position over subframe (4).
(3) Feed hydraulic hoses (5) and electrical connector (6)
through turntable bearing (1).
16-231
