TM 9-2320-366-34-3
NOTE
Steps (6) through (13) require the aid of an
assistant.
(6) Remove screw (8), washer (9), and bushing (10) from
rivet eyebolt (11).
(7) Remove rivet eyebolt (11) from pivot shaft (12).
(8) Remove pivot shaft (12) from erection cylinder (13).
(9) Position erection cylinder (13) against tool box (14).
(10) Remove screw (15), washer (16), and bushing (17) from
rivet eyebolt (18).
(11) Remove rivet eyebolt (18) from pivot shaft (19).
(12) Remove pivot shaft (19) from turntable (20).
(13) Remove mast (1) from turntable (20).
16-225
