TM 9-2320-366-34-3
16-34. M1089 BOOM FLY SECTION REPLACEMENT/ADJUSTMENT (CONT)
c. Installation.
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes.
Wear safety goggles/glasses
when using; avoid contact with eyes.
If
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in serious injury or
death to personnel.
(1) Apply sealing compound to both wear pad mounting
locations in outer end of boom mid section (1).
(2) Apply sealing compound to contact side of two wear
pads (2).
(3) Install two wear pads (2) in outer end of boom mid
section (1).
(4) Apply grease to wear pads (2).
(5) Apply sealing compound to threads of two screws (3).
(6) Install two wear pads (4) on boom fly section (5) with two
screws (3).
(7) Apply grease to wear pads (4) and sliding surfaces of
boom fly section (5).
16-192
