TM 9-2320-366-34-3
16-28. M1084/M1086 FOUR WAY CONTROL VALVE ASSEMBLY
REPLACEMENT/REPAIR (CONT)
NOTE
• Lubricate all parts with lubricating oil during
assembly.
• All control valve bodies are assembled the same
way. Lift Control valve body shown.
(42) Install spool (50) in valve body (51).
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes.
Wear safety goggles/glasses
when using; avoid contact with eyes.
If
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in injury to personnel.
(43) Apply sealing compound to threads of four screws (52).
(44) Install preformed packing (53), end cap (54) and four
screws (52) on valve body (51) with matchmarks aligned.
(45) Apply sealing compound to threads of four screws (55).
(46) Install preformed packing (56), lever cap (57) and four
screws (55) on valve body (51) with matchmarks aligned.
(47) Install two backup rings (58) and quad rings (59) on
pinion seal (60).
16-158
