TM 9-2320-366-34-3
16-23. M1084/M1086 SWING DRIVE ASSEMBLY REPLACEMENT/REPAIR (CONT)
(19) Remove race (28), bearing (29), race (28), and spacer
(30) from sun gear (31).
(20) Remove sun gear (31) from swing drive (21).
(21) Remove planetary gear (32) from swing drive (21).
NOTE
All three gears are disassembled the same
way. One gear shown.
(22) Install roll pin (33) in pin (34).
(23) Remove pin (34), gear (35), and two spacers (36) from
carrier (37).
(24) Remove roll pin (33) from pin (34).
(25) Remove bearing (38) from gear (35).
(26) Remove center spacer (39) from carrier (37).
(27) Perform steps (21) through (26) on two remaining gears.
16-114
