TM 9-2320-366-34-3
Section II. MAINTENANCE PROCEDURES
16-2. M1084/M1086 MATERIAL HANDLING CRANE (MHC) REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (TM 9-2320-366-20-3).
Remote control cable stowage box removed (TM 9-
2320-366-20-5).
Remote control stowage box removed (TM 9-2320-
366-20-5).
Tools and Special Tools
Goggles, Industrial (Item 28, Appendix B)
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Adapter, Socket Wrench (Item 3, Appendix B)
Multiplier, Torque Wrench (Item 42, Appendix B)
Sling, Cargo (2) (Item 56, Appendix B)
Pan, Drain (Item 43, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Trestle, Motor Vehicle Maintenance (Item 81,
Appendix B)
Materials/Parts
Shackle (4) (Item 80, Appendix C)
Cap and Plug Set (Item 17, Appendix C)
Packing, Preformed (Item 231, Appendix F)
Packing, Preformed (2) (Item 264, Appendix F)
Ties, Cable, Plastic (Item 92, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
Shim (as required) (Item 413, Appendix F)
Shim (as required) (Item 414, Appendix F)
Shim (as required) (Item 415, Appendix F)
Shim (as required) (Item 416, Appendix F)
Rope, Fibrous (Item 62, Appendix C)
Personnel Required
(3)
WARNING
Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
a. Removal.
CAUTION
Cap or plug hydraulic connections to prevent
contamination of hydraulic system. Failure to
comply may result in damage to equipment.
NOTE
Tag hoses and connection points prior to
disconnecting.
(1) Position drain pan under crane hydraulic manifold (1).
(2) Disconnect hydraulic hose (2) and two hydraulic hoses
(3) from fitting (4) and two fittings (5).
16-4
