TM 9-2320-366-34-3
(11) Remove four screws (25) from two clamps (26).
(12) Remove four nuts (27), washers (28), screws (29), and
two clamps (26) from cab rear wall (4).
NOTE
Perform step (13) on left and right sides of
cab rear wall. Left side shown.
(13) Remove two screws (30) and latch (31) from cab rear
wall (4).
c. Assembly.
NOTE
Perform steps (1) and (2) on left and right
sides of cab rear wall. Left side shown.
(1) Position latch (1) on car rear wall (2) with two screws (3).
(2) Tighten two screws (3) to 62-124 lb-in. (7-14 N·m).
Change 1
15-103
