TM 9-2320-366-34-3
b. Disassembly.
(1) Remove six screws (1), washers (2), and three rifle
clamps (3) from cab rear wall (4).
(2) Remove 10 screws (5), washers (6), and five hinges (7)
from cab rear wall (4).
NOTE
Perform steps (3) through (6) on left and right
sides of cab rear wall. Right side shown.
(3) Remove two screws (8) and friction catch stud (9) from
cab rear wall (4).
(4) Remove screw (10) and centering cup (11) from cab rear
wall (4).
(5) Remove seal (12) from cab rear wall (4). Discard seal.
(6) Remove captive screw (13) from cab rear wall (4).
Discard captive screw.
15-101
