TM 9-2320-366-34-3
15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR (CONT)
CAUTION
Lower cab straight down to clear radiator.
Failure to comply may result in damage to
equipment.
(13) Position cab (24) on two bearing housings (25).
WARNING
Adhesive Sealant MIL-S-46163 can damage
your eyes. Wear safety goggles when using;
avoid contact with eyes. Failure to comply
may result in injury to personnel. If sealant
contacts eyes, flush eyes with water and get
immediate medical attention.
Failure to
comply may result in injury to personnel.
(14) Apply sealing compound to threads of two screws (26).
NOTE
Left and right side bearing housings are installed
the same way. Right side shown.
(15) Position two washers (27) and screws (26) in right side
bearing housing (25).
(16) Apply sealing compound to threads of four screws (28).
(17) Position four screws (28) in right side bearing housing
(25).
(18) Tighten four screws (28) and two screws (26) to 34-42
lb-ft (47-57 N·m).
(19) Perform steps (14) through (18) on left side bearing
housing.
15-78
Change 1
