TM 9-2320-366-34-3
15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR (CONT)
b. Disassembly.
(1) Remove spanner nut (1), washer (2), and left side
bearing housing (3) from cab front support (4).
(2) Remove sleeve bushing (5) from left side cab tilt arm (6).
Discard sleeve bushing.
(3) Remove sleeve bushing (7) from bushing (8).
(4) Remove bushing (8) from left side bearing housing (3).
Discard bushing.
(5) Perform steps (1) through (4) on right side of cab front
support assembly.
c. Assembly.
NOTE
Lubricate bushings with paraffin and mineral oil
prior to installation.
(1) Install bushing (1) in left side bearing housing (2).
(2) Install sleeve bushing (3) in bushing (1).
15-74
