TM 9-2320-366-34-3
NOTE
• Steps (4) and (5) require the aid of an
assistant.
• Left and right side of cab front support
assembly is installed the same way. Left
side shown.
(4) Position two sleeve spacers (12), upper resilient mounts
(13), and cab front support assembly (14) on two front
bumper mounting brackets (15).
(5) Position two lower resilient mounts (16) on front bumper
mounting brackets (15) with two bolts (17), washers (18)
and self-locking nuts (19).
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes.
Failure to comply may result in injury to
personnel. If sealant contacts eyes, flush
eyes with water and get immediate
medical attention. Failure to comply may
result in injury to personnel.
(6) Apply sealing compound to threads of shoulder bolt (20).
(7) Position shoulder bolt (20), washer (21), and nut (22) in
cab mounting bracket (1).
Change 1
15-76.1/(15-76.2 Blank)
