TM 9-2320-366-34-3
15-2. CAB REPLACEMENT (CONT)
CAUTION
Align arrow on top of tilt cylinder to point
toward front of cab. Failure to comply may
result in damage to equipment.
(18) Position cab tilt cylinder (16) in tilt cylinder mounting
bracket (17).
(19) Position cab tilt cylinder mounting bolt (18) in tilt cylinder
mounting bracket (17) and tilt cylinder (16) with self-
locking nut (19).
(20) Tighten self-locking nut (19) to 180-232 lb-ft (244-315
N·m).
(21) Remove spreader bar, cargo sling and rubber sheet from
cab (2).
CAUTION
Cab latch must be adjusted so that it rides
squarely on the latch support and does not
contact the welded area of the latch support.
Failure to comply may result in damage to
equipment.
(21.1) Adjust cab latch (19.1) on latch supports (19.2).
15-48
Change 1
