TM 9-2320-366-34-3
WARNING
Brace cab with cab support tool before
installing locking arm, spacer, washer,
and cotter pin on tilt cylinder mounting
bolt.
Failure to comply may result in
serious injury or death to personnel.
(22) Raise cab enough to install cab support tool on engine
rear lifting eye (20) (TM 9-2320-366-10-1).
WARNING
After cab is lowered on cab support tool,
return cab tilt selector knob to the RAISE
position for added safety.
Failure to
comply may result in injury to personnel.
(23) Lower cab on cab support tool (TM 9-2320-366-10-1).
CAUTION
Do not allow cab latch to change position
while tightening screws. Failure to comply
may result in damage to equipment.
(23.1) Tighten two screws (20.1) to 34-44 lb-ft (44-60 N·m).
Change 1
15-48.1/(15-48.2 Blank)
