TM 9-2320-366-34-3
15-2. CAB REPLACEMENT (CONT)
CAUTION
Lower cab straight down to clear radiator.
Failure to comply may result in damage to
equipment.
NOTE
Left and right side cab front support mounts are
connected the same way. Right side shown.
(3) Position cab (2) on two cab front support mounts (3).
WARNING
Adhesive Sealant MIL-S-46163 can damage
your eyes. Wear safety goggles when using;
avoid contact with eyes. Failure to comply
may result in injury to personnel. If sealant
contacts eyes, flush eyes with water and get
immediate medical attention.
Failure to
comply may result in injury to personnel.
(4) Apply sealing compound to threads of two screws (4).
(5) Position two washers (5) and screws (4) in right side cab
front support mount (3).
(6) Apply sealing compound to threads of four screws (6).
(7) Position four screws (6) in right side cab front
support mount (3).
(8) Tighten four screws (6) and two screws (4) to 32-42 lb-ft
(45-57 N·m).
(9) Perform steps (3) through (8) on left side cab front
support mount (3).
15-46
Change 1
