TM 9-2320-366-34-2
7-7. STATIONARY CLUTCH SOLENOID ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transmission internal wiring harness removed (para 7-
13)
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B)
Multimeter, Digital (Item 41, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Rag, Wiping (Item 60, Appendix C)
Filter Element (3) (Item 32, Appendix F)
Seal, Non-Metallic (2) (Item 375, Appendix F)
Packing, Preformed (3) (Item 298, Appendix F)
Packing, Preformed (3) (Item 300, Appendix F)
Solvent, Dry Cleaning (Item 83, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
a. Removal.
Remove eight screws (1) and clutch valve body (2)
from main valve body (3).
b. Disassembly.
NOTE
Stationary clutch solenoid contains parts
which cannot be interchanged. Tag all
parts prior to removal.
(1) Remove two face seals (1) from clutch valve body (2).
Discard face seals.
(2) Remove three filter screens (3) from clutch valve body
(2). Discard filter screens.
7-55
