TM 9-2320-366-34-2
7-6. TRANSMISSION RESILIENT MOUNT AND BRACKET REPLACEMENT
This task covers:
a. LH Removal
b. LH Installation
c. RH Removal
d. RH Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transmission assembly removed (para 7-4).
Hydraulic reservoir removed, if equipped (LH side) (TM
9-2320-366-20-5).
Battery box removed (LH side) (TM 9-2320-366-20-3).
Fuel tank removed (RH side) (TM 9-2320-366-20-3).
Spare tire retainer removed (TM 9-2320-366-20-4).
Intake air cleaner removed (TM 9-2320-366-20-3).
RH or LH engine and transmission mount bracket
removed (para 7-17).
Tools and Special Tools
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Tools and Special Tools (Cont)
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Materials/Parts
Bolt (4) (Item 15, Appendix F)
Nut, Self-locking (8) (Item 205, Appendix F)
Bolt (4) (Item 8, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of failing debris. Failure to
comply may result in injury to
personnel.
a. LH Removal.
CAUTION
When removing bolts, continuous removal
of collars is mandatory. Failure to comply
will result in seizing of collar to bolt.
NOTE
Steps (1) through (8) require the aid of an
assistant.
Perform steps (1) and (2) on all vehicles not
equipped with hydraulic reservoir.
(1) Remove two collars (1) and bolts (2) from frame rail
(3). Discard collars and bolts.
(2) Remove two collars (4) and bolts (5) from frame rail
(3). Discard collars and bolts.
7-48
Change 1
