TM 9-2320-366-34-2
7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT)
(132) Remove two bolt circle adapters (3) from long adapter
support bar (130).
(133) Remove two bolts (131) and long adapter support bar
(130) from two 90-degree brackets (132).
(134) Remove two 90-degree brackets (132) from curb side
of headplate (133).
(135) Remove 90-degree bracket (134) from road side of
headplate (133).
c. Follow-On Maintenance.
(1) Install intermediate drive shaft (TM 9-2320-366-20-4).
(2) Install front drive shaft (TM 9-2320-366-20-4).
(3) Service transmission (TM 9-2320-366-20-3).
(4) Connect batteries (TM 9-2320-366-20-3).
(5) Install spare tire (TM 9-2320-366-10-2).
(6) Operate vehicle and check transmission for oil leaks.
(7) Check exhaust pipe for exhaust leaks, excessive
noise, and vibration.
(8) Operate 15K Self-Recovery Winch (SRW) (if equipped)
and check for hydraulic leaks (TM 9-2320-366-10-2).
(9) Operate wrecker functions (M1089) and check for
proper operations and hydraulic leaks (TM 9-2320-
366-10-2).
End of Task.
7-46
Change 1
