TM 9-2320-366-34-2
7-5. TRANSMISSION TO MAINTENANCE STAND
This task covers:
a. Installation
b. Removal
INITIAL SETUP
Equipment Condition
Transmission assembly removed (para 7-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Stand, Differential Carrier, Repair (TM 9-2320-
366-20)
Transmission Lift/Mounting Bracket Assembly
(Item 26, Appendix D)
Materials /Parts
Bolt, Machine (4) (Item 15, Appendix C)
Nut, Self-locking (4) (Item 54, Appendix C)
Personnel Required
(2)
WARNING
Transmission weighs approximately
1300 lbs (590 kgs). Attach a suitable
lifting device prior to lifting. Failure to
comply may result in injury to personnel
or damage to equipment.
a. Installation.
(1) Install transmission stand bracket (1) on transmission
(2) with four bolts (3) and self-locking nuts (4).
NOTE
Step (2) requires the aid of an assistant.
(2) Install transmission (2) on maintenance stand with four
bolts (5) and nuts (6).
b. Removal.
NOTE
Step (1) requires the aid of an assistant.
(1) Remove four nuts (6), bolts (5), and transmission (2)
from maintenance stand.
(2) Remove four self-locking nuts (4), bolts (3), and
transmission stand bracket (1) from transmission (2).
Discard self-locking nuts.
End of Task.
7-47
