TM 9-2320-366-34-2
3-8. CRANKSHAFT FRONT SEAL REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance.
INITIAL SETUP
Equipment Conditions
Pulley damper removed (para 3-7).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Inserter, Seal (TM 9-2320-366-20)
Drill, Portable Electric (Item 21, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Gage, Belt Tension (TM 9-2320-366-20)
Puller Kit, Universal (Item 50, Appendix B)
Caliper, Vernier (Item 11, Appendix B)
Tools and Special Tools (Cont)
Drill Set, Twist (Item 20, Appendix B)
Materials/Parts
Lubricating Oil, Engine (Item 46, Appendix C)
Soap, Laundry (Item 81, Appendix C)
Seal, Plain Encased (Item 387, Appendix F)
Excluder (Item 31, Appendix F)
Personnel Required
(2)
a. Removal.
(1) Loosen screws (1 and 2) on bracket (3).
(2) Remove water pump belt (4) from pulley (5).
(3) Remove four screws (6), plate (7), and pulley (5) from
crankshaft (8).
(4) Remove excluder (9) from pulley (5). Discard excluder.
3-77
