TM 9-2320-366-34-2
3-7. PULLEY DAMPER REPLACEMENT (CONT)
b. Installation.
CAUTION
Damper is easily damaged and must be
handled carefully. Failure to comply may
result in damage to equipment.
NOTE
Step (1) requires the aid of an assistant.
(1) Position pulley (1), damper (2), and adapter (3) on
crankshaft pulley (4) with eight washers (5) and screws
(6).
(2) Tighten eight screws (6) to 33-47 lb-ft (45-65 N·m).
(3) Install two alternator drive belts (7) on engine.
CAUTION
Steps (4) and (5) must be accomplished
while maintaining belt tension.
Failure to
comply may result in damage to equipment.
NOTE
Tension adjustment for new belt is 115-125
lbs (52-57 N). For reinstalled belt 85-95 lbs
(39-43 N).
(4) Adjust belt tension with idler pulley (8).
(5) Tighten two screws (9) to 43-51 lb-ft (58-69 N·m).
c. Follow-On Maintenance.
(1) Install engine fan and fan clutch (TM 9-2320-366-20-3).
(2) Start engine check for proper operation (TM 9-2320-366-
10-1).
(3) Shut down engine (TM 9-2320-366-10-1).
End of Task.
3-76
