TM 9-2320-366-34-2
3-6. CYLINDER HEAD/HEAD GASKET REPLACEMENT (CONT)
(3) Install preformed packing (5) on 90-degree fitting (6).
(4) Install 90-degree fitting (6) in cylinder head (4).
(5) Install preformed packing (7) on 90-degree fitting (8).
(6) Install 90-degree fitting (8) in cylinder head (4).
(7) Install front lifting eye bracket (9) on cylinder head (4)
with four washers (10) and screws (11).
(8) Install rear lifting eye bracket (12) on cylinder head (4)
with five washers (13) and screws (14).
WARNING
Cylinder head weighs approximately 150 lbs
(68 kgs). Attach a suitable lifting device
prior to installation. Failure to comply may
result in injury to personnel or damage to
equipment.
NOTE
Step (9) requires the aid of an assistant.
(9) Position gasket (15) and cylinder head (4) on cylinder
block (16).
3-72