TM 9-2320-366-34-2
3-6. CYLINDER HEAD/HEAD GASKET REPLACEMENT
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
d. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Inlet manifold removed (para 3-22).
Fuel filter base removed (TM 9-2320-366-20-3).
Orifice tube assembly removed (TM 2320-366-
20-3).
Rocker arms and push rods removed (para 3-
12).
Fuel control linkage removed (para 4-7).
Fuel injectors removed (para 4-2).
Thermostat housing removed (TM 9-2320-366-
20-3).
Exhaust manifold removed (para 3-23).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix
B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix
B)
Tools and Special Tools (Cont)
Socket Wrench Attachment, Screwdriver (TM 9-2320-
366-20)
Socket, Socket Wrench (Item 65, Appendix B)
Adapter, Socket (Item 4, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Materials/Parts
Packing, Preformed (Item 240, Appendix F)
Packing, Preformed (2) (Item 255, Appendix F)
Gasket (Item 38, Appendix F)
Packing, Preformed (Item 248, Appendix F)
Packing, Performed (Item 249, Appendix F)
Packing, Performed (Item 246, Appendix F)
Packing, Preformed (Item 257, Appendix F)
Rag, Wiping (Item 60, Appendix C)
Ties, Cable Plastic (Item 92, Appendix C)
Lubricating Oil, Engine (Item 46, Appendix C)
Solvent, Dry Cleaning (Item 83, Appendix C)
Personnel Required
(2)
a. Removal.
(1) Disconnect fuel tube (1) from 90-degree fitting (2).
(2) Remove preformed packing (3) from 90-degree fitting (2).
Discard preformed packing.
(3) Remove screw (4), washer (5), clamp (6), and fuel tube
(1) from cylinder head (7).
3-68
