TM 9-2320-366-34-4
(25) Position pressure port plug (29) in second and third
stage bearing carrier (25).
(26) Tighten pressure port plug (29) to 140 lb-in. (16 N·m).
(27) Install drive gear (30) and driven gear (31) in second
and third stage bearing carrier (25).
(28) Install two gasket seals (32) on third stage gear housing
(33).
(29) Install third stage gear housing (33) on second and third
stage bearing carrier (25) with matchmarks aligned.
(30) Install ring seal (34) on port end cover (35).
(31) Install two roller bearings (36) in port end cover (35).
(32) Install six seals (37) in thrust plate (38).
(33) Install thrust plate (38) in port end cover (35).
26-11