TM 9-2320-366-34-4
26-2. M1089 THREE STAGE HYDRAULIC PUMP REPAIR (CONT)
c. Assembly.
CAUTION
Plug must be installed in location marked
during removal. Failure to comply may result
in damage to equipment.
NOTE
Lubricate all parts with hydraulic fluid during
assembly.
(1) Install plug (1) in shaft end cover (2).
(2) Install seal (3) in shaft end cover (2).
(3) Install ring seal (4) in shaft end cover (2).
(4) Install two roller bearings (5) in shaft end cover (2).
(5) Install six seals (6) on thrust plate (7).
(6) Install thrust plate (7) on shaft end cover (2).
(7) Install drive shaft (8), connecting shaft (9), and driven
shaft (10) in shaft end cover (2).
(8) Install two gasket seals (11) on first stage gear housing
(12).
(9) Install first stage gear housing (12) on shaft end cover
(2) with matchmarks aligned.
26-8