TM 9-2320-366-34-4
(10) Install two ring seals (13) in first and second stage
bearing carrier (14).
(11) Install four roller bearings (15) in first and second stage
bearing carrier (14).
(12) Install 12 seals (16) in two thrust plates (17).
(13) Install thrust plates (17) on first and second stage
bearing carrier (14).
(14) Install first and second stage bearing carrier (14) on first
stage gear housing (12) with matchmarks aligned.
(15) Position pressure port plug (18) in first and second stage
bearing carrier (14).
(16) Tighten pressure port plug (18) to 140 lb-in. (16 N·m).
(17) Install drive gear (19), connecting shaft (20), and driven
gear (21) in first and second stage bearing carrier (14).
26-9