TM 9-2320-366-34-3
(18) Remove solenoid assembly (24) from lower control valve
assembly (2).
NOTE
Note
position
of
seals,
packings,
and
retaining plates prior to removal.
(19) Remove seal (25), preformed packing (26), retaining
plate (27) and spacer (28) from solenoid assembly (24).
Discard preformed packing and seal.
(20) Remove two screws (29), retaining plates (30), retaining
packing (31), and seal (32) from lower control valve
assembly (2). Discard retaining packing and seal.
(21) Remove piston rod (33) from stripper bolt (34).
(22) Remove spacer (35) and flange (23) from piston rod
(33).
(23) Remove inner seal (36) from flange (23). Discard seal.
CAUTION
Piston rod is made of aluminum and can be
easily damaged. Failure to comply will result
in damage to equipment.
(24) Place piston rod (33) in soft vise.
(25) Remove cap screw (37) and piston (21) from piston rod
(33).
Change 1
16-516.1