TM 9-2320-366-34-3
16-82. M1089 LINEAR DIRECTIONAL CONTROL VALVE REPLACEMENT/REPAIR
(CONT)
(3) Remove three self-locking nuts (12), washers (13), bolts
(14), and linear directional control valve (4) from frame
(15). Discard self-locking nuts.
b. Disassembly.
NOTE
Mark adapters for correct alignment during
installation.
(1) Remove two 90-degree fittings (1) from linear directional
control valve (2).
(2) Remove two preformed packings (3) from 90-degree
fittings (1). Discard preformed packings.
(3) Remove tee fitting (4) from adapter (5).
(4) Remove adapter (5) from linear directional control valve
(2).
(5) Remove preformed packing (6) from adapter (5). Discard
preformed packing.
16-498
