TM 9-2320-366-34-3
(6) Remove adapter (7) from linear directional control valve
(2).
(7) Remove preformed packing (8) from adapter (7). Discard
preformed packing.
(8) Remove tee fitting (9) from linear directional control valve
(2).
(9) Remove preformed packing (10) from tee fitting (9).
Discard preformed packing.
c. Assembly.
NOTE
Apply lubricating oil to preformed packings
prior to installing.
(1) Install preformed packing (1) on tee fitting (2).
(2) Position tee fitting (2) on linear directional control valve
(3).
(3) Tighten tee fitting (2) to 68-75 lb-ft (92-101 N·m).
(4) Install preformed packing (4) on adapter (5).
(5) Position adapter (5) on linear directional control valve
(3).
(6) Tighten adapter (5) to 43-47 lb-ft (58-63 N·m).
16-499