TM 9-2320-366-34-3
(15) Install preformed packing (14) on 90-degree fitting (15).
(16) Install 90-degree fitting (15) in counterbalance valve (1).
(17) Install preformed packing (16) on valve plug (17).
(18) Install valve plug (17) in counterbalance valve (1).
(19) Install two preformed packings (18 and 19) on
counterbalance valve (1).
(20) Position counterbalance valve (1) on winch drive motor
(20) with four screws (21).
(21) Tighten four screws (21) to 38-45 lb-ft (52-61 N·m).
(22) Connect four hydraulic hoses (22) to counterbalance
valve (1).
16-495