TM 9-2320-366-34-3
16-82. M1089 LINEAR DIRECTIONAL CONTROL VALVE REPLACEMENT/REPAIR
(CONT)
(7) Install preformed packing (6) on adapter (7).
(8) Position adapter (7) on linear directional control valve
(3).
(9) Tighten adapter (7) to 43-47 lb-ft (58-63 N·m).
(10) Install tee fitting (8) on adapter (7).
(11) Install two preformed packings (9) on 90-degree fittings
(10).
(12) Install two 90-degree fittings (10) on linear directional
control valve (3).
d. Installation.
(1) Install linear directional control valve (1) on control panel
frame (2) with three washers (3), bolts (4), and self-
locking nuts (5).
(2) Connect hydraulic tubes (6 through 12) to linear
directional control valve (1).
16-500