TM 9-2320-366-34-3
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes. Wear safety goggles/glasses
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
(28) Apply sealing compound to threads of two bolts (47).
(29) Position pay-out hydraulic motor (48) on spooler
weldment (17) with two washers (49) and bolts (47).
(30) Tighten bolts (47) to 76-84 lb-ft (103-114 N·m).
(31) Position two hoses (50) on pay-out hydraulic motor (48).
(32) Tighten hoses (50) to 36-39 lb-ft (49-53 N·m).
(33) Perform steps (28) through (32) on right spooler weldment.
c. Follow-On Maintenance.
(1) Install rear ladder (TM 9-2320-366-20-4).
(2) Hydraulic reservoir supply and return valves in open
position (TM 9-2320-366-10-2).
(3) Install rear tool box (TM 9-2320-366-20-4).
(4) Operate underlift and stiffleg assembly checking for
proper operation and hydraulic leaks (TM 9-2320-366-
10-2).
End of Task.
16-417
