TM 9-2320-366-34-3
(7) Install plate (2) on swing drive assembly (3) with two
screws (1).
(8) Remove plug (6) from oil fill pipe hole (7).
(9) Install oil fill pipe (8) in oil fill pipe hole (7).
f. Follow-On Maintenance.
(1) Install hydraulic orbit motor (Para 16-55).
(2) Install cross relief valve (Para 16-54).
(3) Hydraulic reservoir supply valve and return valve in
open position (TM 9-2320-366-10-2).
(4) Perform crane load test (para 16-62).
End of Task.
16-295