TM 9-2320-366-34-3
NOTE
Step (3) requires the aid of an assistant.
(3) Remove four screws (4), lockwashers (5), and cross
relief valve (1) from hydraulic motor (6).
Discard
lockwashers.
(4) Remove two preformed packings (7) from hydraulic
motor (6). Discard preformed packings.
(5) Remove three 90-degree fittings (3) from cross relief
valve (1).
(6) Remove three preformed packings (8) and preformed
packings (9) from 90-degree fittings (3).
Discard
preformed packings.
b. Installation.
(1) Install three preformed packings (1) and preformed
packings (2) on 90-degree fittings (3).
(2) Install three 90-degree fittings (3) in cross relief valve (4).
16-297