TM 9-2320-366-34-4
18-4. M1084/M1086 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT)
WARNING
Pintle
hook
extension
weighs
approximately 90 lbs (41 kgs). Attach a
suitable lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
• Step (59) requires the aid of two assistants.
• Use bolts P/N 12414307-142 and self-locking
nuts P/N 12414308-025 on step (59).
(59) Position pintle hook extension (57) on rear crossmember
(9) with four bolts (76) and self-locking nuts (77).
NOTE
• Use bolts P/N 12414307-143 and self-locking
nuts P/N 12414308-025 on step (60).
• Steps (60) and (61) require the aid of an
assistant.
(60) Position two bolts (58) and self-locking nuts (59) in pintle
hook extension (57).
(61) Tighten four self-locking nuts (77) and two self-locking
nuts (59) to 196-240 lb-ft (265-325 N·m).
18-46
Change 1
