TM 9-2320-366-34-4
18-4. M1084/M1086 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT)
NOTE
• Position two spacers on frame rails with beveled
edges facing down.
• Route connectors and terminal lugs under rear
main crossmember.
(39) Position rear main crossmember support (64) on vehicle.
(40) Position two spacers (65) between rear main
crossmember support (64) and LH and RH frame rail (66
and 39).
NOTE
• Rotate cable assembly with terminal lugs 180
degrees (upside down) from previous position.
• Position rear main crossmember support for
access to ground terminals
(41) Route terminal lugs TL32 (24), TL31 (30), and TL30 (35)
to three ground terminals (67).
18-42
Change 1
