TM 9-2320-366-34-4
18-4. M1084/M1086 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT)
NOTE
Use bolts P/N 12414307-079, P/N 12414307-
148, P/N 12414307-149 and self-locking nuts
P/N 12414308-021 and P/N 12414308-025
on steps (48) through (50).
(48) Position two bolts (68) and self-locking nuts (69) on rear
main crossmember support (64).
(49) Position four bolts (70) and self-locking nuts (71) on rear
main crossmember support (64).
(50) Position six bolts (72) and self-locking nuts (73) on rear
lower crossmember support (61).
(51) Remove 45-degree grease fitting (74) from support (12).
(52) Install grease fitting (75) in support (12).
18-44
Change 1
