TM 9-2320-366-34-4
26-13. M1089 OUTRIGGER EXTENSION CYLINDER REPAIR (CONT)
(5) Remove seal (8) from rod (7). Discard seal.
(6) Remove ring (6) and cylinder head (9) from rod (7).
(7) Remove wiper ring (10) from ring (6). Discard wiper
ring.
(8) Remove seal (11), back-up ring (12), preformed packing
(13), two wear rings (14), and buffer seal (15) from
cylinder head (9). Discard seal, back-up ring, preformed
packing, wear rings, and buffer seal.
(9) Perform steps (4) through (8) on remaining rod.
b. Cleaning/Inspection.
WARNING
Dry Cleaning Solvent is TOXIC and flammable. Wear protective goggles and gloves; use
only in well-ventilated area; avoid contact with skin, eyes, and clothes, and do not breath
vapors. Keep away from heat or flame. Never smoke when using solvent; the flashpoint
for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 138°F (50°C). Failure to
comply may result in serious injury or death to personnel.
If personnel become dizzy while using cleaning solvent, immediately get fresh air and
medical help. If solvent contacts skin or clothes, flush with cold water. If solvent contacts
eyes, immediately flush eyes with water and get immediate medical attention. Failure to
comply may result in serious injury or death to personnel.
(1) Clean all metal parts with dry cleaning solvent.
26-80
