TM 9-2320-366-34-4
(6) Install two wear rings (8) on cylinder head (9).
(7) Install wiper ring (10), rod seal (11), and buffer seal (12)
on cylinder head (9).
(8) Install back-up ring (13) and preformed packing (14) on
cylinder head (9).
(9) Install wear ring (15) on cylinder head (9).
(10) Install cylinder head (9) on rod (4).
(11) Install preformed packing (16) and two back-up rings
(17) on piston (18).
(12) Install two seal assemblies (19) on piston (18) with vee
in seals facing opposite directions.
26-77