TM 9-2320-366-34-4
c. Assembly.
NOTE
Apply lubricating oil to all parts during
assembly.
(1) Install roller bearing cups (1 and 2) in rear output
housing (3).
(2) Install roller bearing cone (4) in output housing (3).
(3) Install spacer (5), shim(s) (6), roller bearing cone (7),
and output shaft (8) in output housing (3).
(4) Install oil seal (9) in output housing (3).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(5) Install ring gear (10) on output housing (3) with retaining
ring (11).
21-57
