TM 9-2320-366-34-4
21-11. REAR OUTPUT HOUSING REPAIR
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
d. Bearing Preload Adjustment
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transfer case module disassembled (para 22-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Puller Kit, Universal (Item 51, Appendix B)
Indicator, Dial (Item 36, Appendix B)
Inserter, Bearing and Bushing (TM 9-2320-366-20)
Gloves, Rubber (Item 26, Appendix B)
Handle, Drive (TM 9-2320-366-20)
Caliper, Vernier (Item 11, Appendix B)
Press, Arbor, Hand Operated (Item 48, Appendix
B)
Inserter, Bearing and Bushing (TM 9-2320-366-20)
Tools and Special Tools (Cont)
Pliers, Retaining Ring (Item 44, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Inserter, Bearing and Bushing (TM 9-2320-366-20)
Inserter, Bearing and Bushing (TM 9-2320-366-20)
Materials/Parts
Rag, Wiping (Item 60, Appendix C)
Oil, Lubricating (Item 45, Appendix C)
Seal, Plain Encased (Item 393, Appendix F)
Shim(s) (Item 418, Appendix F)
Shim(s) (Item 419, Appendix F)
Shim(s) (Item 420, Appendix F)
Solvent, Dry Cleaning (Item 83, Appendix C)
a. Disassembly.
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(1) Remove retaining ring (1) and ring gear (2) from output
housing (3).
21-54
