21-11. REAR OUTPUT HOUSING REPAIR (CONT)

21-11. REAR OUTPUT HOUSING REPAIR CONT. - TM-9-2320-366-34-4_259

21-11. REAR OUTPUT HOUSING REPAIR (CONT) - TM-9-2320-366-34-4_261

TM-9-2320-366-34-4 M1083 Series 5-Ton 6x6 Medium Tactical Vehicles (MTV) Manual
Page Navigation
210

TM 9-2320-366-34-4 21-11. REAR OUTPUT HOUSING REPAIR (CONT) NOTE Replace any part that fails visual inspection or size measurement requirements. (2) Inspect ring gear (1) for scoring, burring, cracks, missing teeth, and excessive wear. (3) Inspect output shaft (2) for scoring, burring, cracks, deformed splines, and excessive wear. (4) Measure output shaft (2) journal (A), minimum outside diameter is 1.85 in. (4.70 cm). (5) Inspect two roller bearing cones (3) for pitting, cage damage, and excessive wear. (6) Inspect roller bearing cups (4) for pitting, cage damage, and excessive wear. (7) Inspect spacer (5) for damage, cracks, and excessive wear. (8) Inspect output housing (6) for cracks, scoring, burring, and excessive wear. (9) Measure seal surface (B) of output housing (6), minimum inside diameter is 3.0 in. (7.6 cm). (10) Inspect shim(s) (7) for cracks and burring. 21-56

Privacy Statement
Press Release
Contact