TM 9-2320-366-34-4
(8) Install C1 spring (9) in C2 piston (5).
(9) Install sealring (10) on C1 balance piston (11).
CAUTION
Ensure slots in C1 balance piston are aligned
with C1 piston. Failure to comply may result
in damage to equipment.
(10) Install C1 balance piston (11) in C2 piston (5).
(11) Compress C1 balance piston (11) for installation of
retaining ring (12).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(12) Install retaining ring (12) on C2 piston (5).
(13) Install C2 piston (5) in clutch assembly (13).
(14) Install C2 spring (14) in clutch assembly (13).
(15) Install retaining ring (15) in clutch assembly (13).
NOTE
Alternately stack friction plates and reaction
plates.
(16) Install two C1 pressure plates (16), six friction plates
(17), and five reaction plates (18) in clutch assembly
(13).
(17) Install retaining ring (19) in clutch assembly (13).
21-27
