TM 9-2320-366-34-4
21-5. CONVERTER HOUSING MODULE REPAIR (CONT)
NOTE
Perform steps (13) and (14) on drive hubs
with two splines.
(13) Remove retaining ring (9) from drive hub (10).
(14) Remove drive hub (10) from gear (7).
(15) Remove two bearings (11) from gear (7).
(16) Remove vent plug (12) from converter housing (3).
NOTE
If transmission is SN 6510003100 or lower and
engine speed sensor PN 29503523 has never
been replaced, discard engine speed sensor
and replace with PN 29509637 and preformed
packing PN 29503383.
(17) Remove screw (13), clip (14), and engine speed sensor
(15) from converter housing (3).
(18) Remove preformed packing (16) from engine speed
sensor (15). Discard preformed packing.
21-32
