TM 9-2320-366-34-4
(41) Position cover (59) on front housing (15) with four
lockwashers (60) and screws (61).
(42) Tighten four screws (61) to 20 lb-in. (2 N·m).
(43) Position three spacers (62) and fan guard (63) on end
housing (23) with three washers (64) and screws (65).
(44) Tighten three screws (65) to 75 lb-in. (9 N·m).
(45) Position washer (66) on voltage regulator (67) with self-
locking nut (68).
CAUTION
Use care when positioning self-locking nut on
regulator not to engage self-locking portion of
nut. Failure to comply will result in damage
to equipment.
(46) Position washer (69) on voltage regulator (67) with self-
locking nut (70).
Change 1
18-75
