TM 9-2320-366-34-3
(25) Tighten four bolts (25) to 152-168 lb-ft (206-228 N·m).
(26) Route 30K winch cable (30) through spooler weldment
(3).
(27) Install pin (31) in 30K winch cable (30) with cotter pin
(32).
(28) Install cable sheave (33) in spooler weldment (3).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(29) Install pin (34) in spooler weldment (3) with two retaining
rings (35).
16-477
