TM 9-2320-366-34-3
16-44. M1089 CABLE FOLLOWER REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Hoist assembly removed (para 16-43).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Tools and Special Tools (Cont)
Goggles, Industrial (Item 28, Appendix B)
Materials/Parts
Sealing Compound (Item 76, Appendix C)
a. Removal.
WARNING
Use care when removing springs. Springs
are under tension and can act as
projectiles when released.
Failure to
comply may result in injury to personnel.
Remove two screws (1), four washers (2), and cable
follower assembly (3) from hoist assembly (4).
b. Disassembly.
(1) Remove two springs (1) from posts (2).
16-239
