TM 9-2320-366-34-3
16-12. M1084/M1086 TURNTABLE BEARING REPLACEMENT (CONT)
(5) Remove two screws (1), washers (2), and chain from
turntable bearing (3).
b. Installation.
(1) Install chain on turntable bearing (1) with two washers
(2) and screws (3).
WARNING
Turntable bearing weighs approximately 150 lbs
(68 kgs). Attach a suitable lifting device prior to
installation. Failure to comply may result in
injury to personnel or damage to equipment.
NOTE
Steps (2) and (3) require the aid of an assistant.
(2) Lift turntable bearing (1) into position over subframe (4).
(3) Feed hydraulic hoses (5) and electrical connector (6)
through turntable bearing (1).
16-64
