TM 9-2320-366-34-3
(4) Position turntable bearing (1) on subframe (4) with screw
holes aligned.
(5) Remove two screws (3), washers (2), and chain from
turntable bearing (1).
(6) Position 16 washers (2) and screws (3) on turntable
bearing (1).
(7) Tighten screws (3) to 355-385 lb-ft (481-522 N m).
c. Follow-On Maintenance.
(1) Install turntable (para 16-11).
(2) Operate MHC and check for proper operation and for oil
leaks (TM 9-2320-366-10-1).
End of Task.
16-65
