TM 9-2320-366-34-3
NOTE
Position twine where both ends start and finish
at the bottom LH corner of seal.
(3) Position twine on seal (2) as shown.
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep
away from open fire and use in a well-
ventilated area.
If adhesive, solvent, or
sealing compound gets on skin or clothing,
wash immediately with soap and water.
Failure to comply may result in injury to
personnel.
(4) Apply lubrication compound to seal (2).
NOTE
Steps (5) through (13) require the aid of an
assistant.
(5) Position windshield (1) in cab (3).
Change 1
15-120.3
