TM 9-2320-366-34-2
b. Installation.
WARNING
Subframe rail weighs approximately 200
lbs (91 kgs).
Attach a suitable lifting
device prior to installation.
Failure to
comply may result in injury to personnel
or damage to equipment.
NOTE
Step (1) requires the aid of two assistants.
(1) Position subframe rail (1) on vehicle.
NOTE
•
Left and right side subframe rails are
installed the same way. Right side shown.
•
Steps (2) through (9) require the aid of an
assistant.
(2) Position three bolts (2) and self-locking nuts (3) in
bracket (4).
(3) Tighten three self-locking nuts (3) to 210-225 lb-ft (285-
305 N·m).
CAUTION
Ensure subframe rail flange is fully in contact
with main frame rail flange. Failure to comply
may result in damage to equipment.
(4) Position two bolts (5) and self-locking nuts (6) in rear
support brace (7).
(5) Tighten two self-locking nuts (6) to 210-225 lb-ft (285-
305 N·m).
(6) Position two bolts (8) and self-locking nuts (9) in bracket
(10).
(7) Tighten two self-locking nuts (9) to 210-225 lb-ft (285-
305 N·m).
13-339
